Erreur 1017 en boucle, help!

Répondre
Partager Rechercher
Bonjour tout le monde!

Voila j'ai récemment repris everquest, telecharger tous les patchs extensions etc, mais arrivé a la selection des servers, ben BAM erreur 1017, encore et toujours.

Cette erreur serait due à un probleme de connectivité; un TSR m'a expliké apres diverse manipulations, que ca viendrait surement de mon FAI.

Qqun joue a everquest avec neuf telecom (mode routeur tant qu'à faire) ?

Voila si qqun a une reponse hesitez pas

merci davance!

EDIT: bon ben pb resolu en passant du mode usb au mode ethernet, pq ny ai je pas pensé plus tot...
Non je suis en usb, mais dapres mes recherches, certains routeurs ont des problemes, qqun utilise ladsl chez 9telecom avec le mode routeur?
Juste pour savoir si je suis le seul dans ce cas ou pas.
http://www.rpgexpert.com/1017/13dollars.jpg http://www.rpgexpert.com/1017/asshat.jpg

http://www.rpgexpert.com/1017/Dontdoit.jpg http://www.rpgexpert.com/1017/Dupe.jpg

http://www.rpgexpert.com/1017/EQ2.jpg http://www.rpgexpert.com/1017/GMKick.jpg

http://www.rpgexpert.com/1017/GodHate.jpg http://www.rpgexpert.com/1017/PillageLD.jpg

http://www.rpgexpert.com/1017/Rare.jpg http://www.rpgexpert.com/1017/Reinstall.jpg


Tu as patcher ton EQ en anglais ?

PS :
http://eqlive.station.sony.com/suppo...rror_codes.jsp

Error Codes After Server Select Screen

Error 1017:

This error states:

"Cannot login to the EverQuest server. You may need to re-run the Update Patch. Repeatedly seeing this message indicates a loss of connectivity to the Patch Server. This is usually temporary."

This error can be confusing because it has to do more with connectivity to the world servers rather then the patch server. Included below are ways to troubleshoot this problem based on your connection type, whether you dial up to connect or you use some type of broadband connection (Cable, DSL). Of course, if the tips below do not help then you will want to also refer to our Network/Connection Support page for additional information on connectivity problems.

If you connect to the Internet using a dial-up modem then you will first want to check to see if you have a network card installed on your computer along with the modem. If you do have a network card installed as well as the modem then you will want to disable it. Most often network cards will have a default subnet mask of 255.0.0.0, which would cause your computer to search itself internally for the EverQuest servers. Since the EverQuest servers are not located on your computer it will never find them, and you will get the 1017 error listed above. If you do not have a network card installed along with the modem then you will want to make sure you have the proper subnet mask. To check this you will want to click on the Start button at your desktop. In the start menu, click on run, and type in 'winipcfg' in the "Open" line. The IP configuration window should pop up and you will be able to check your subnet mask there. If it is set to 255.0.0.0, then you will want to release and renew your IP address until you get a subnet mask that is something other then 255.0.0.0. Ideally you will want to have 255.255.255.0. If you are unable to get a different subnet mask after releasing and renewing then you will need to contact your Internet Service Provider for further assistance.

The same mainly applies to broadband connections as well. Most troubles with the 1017 error come from improper subnet masks. You will want to be careful of multiple network cards in a single machine. Even though one may be set up properly to connect to EverQuest, the other could be defaulting the subnet mask to 255.0.0.0. You will be able to check your subnet mask the same as listed above.

If you are running a firewall or proxy server and are receiving the 1017 error, then please visit our Network/Connection support page to find all the settings to configure your Firewall to be able to connect to EverQuest.
Oui jai DL le patch universel sur le site à SOE.

Jai deja lu et relu tout cke tu as CC, jai essayé tout ca et rien na marché, mais tuot le monde me confirme kil sagit dun probleme de routeur et ke je dois contacter mon FAI.

Genial, a 34ctme deuros la minute et vue que c un probleme delicat, jsens qu 'ils font se faire du blé avec mon appel a neuf telecom

Sinon ma question ci dessus est toujours dactualité, jaimerai bien quune personne utilisant ladsl max de 9tel me dise si tout marche nikel pour lui.

Merci !
pareil adsl neuf tel
et impossible de me connecter ...
comme il est impossible de se connecter a star wars galaxie avec la neuf box ...
si tu as un autre modem adsl ... essaye de te connecter avec ce modem la )
Répondre

Connectés sur ce fil

 
1 connecté (0 membre et 1 invité) Afficher la liste détaillée des connectés